|
8-17-274
Section 8-17-274 Fire Standards Compliant marking. (a) Cigarettes that are certified by a manufacturer
in accordance with Section 8-17-273 shall be marked to indicate compliance with the requirements
of Section 8-17-272. The marking shall be in eight point type or larger and consist of the
letters FSC, which signifies Fire Standards Compliant, permanently printed, stamped, engraved,
or embossed on the package at or near the UPC Code. (b) A manufacturer shall use only one
marking, and shall apply this marking uniformly for all packages including, but not limited
to, packs, cartons, cases, and brands marketed by that manufacturer. (c) Manufacturers certifying
cigarettes in accordance with Section 8-17-273 shall provide a copy of the certifications
to all wholesale dealers and agents to which they sell cigarettes. Wholesale dealers, agents,
and retail dealers shall permit the State Fire Marshal, the Department of Revenue, the Attorney
General, and their employees to inspect markings of...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/8-17-274.htm - 1K - Match Info - Similar pages
8-17-272
Section 8-17-272 Testing and certification of cigarettes. (a) Except as provided in subsection
(g), no cigarettes may be sold or offered for sale in this state or offered for sale or sold
to persons located in this state unless the cigarettes have been tested in accordance with
the test method and meet the performance standard specified in this section, a written certification
has been filed by the manufacturer with the State Fire Marshal in accordance with Section
8-17-273, and the cigarettes have been marked in accordance with Section 8-17-274. (1) Testing
of cigarettes shall be conducted in accordance with the American Society of Testing and Materials
(ASTM) Standard E2187-04, Standard Test Method for Measuring the Ignition Strength of Cigarettes.
(2) Testing shall be conducted on 10 layers of filter paper. (3) No more than 25 percent of
the cigarettes tested in a test trial in accordance with this section shall exhibit full-length
burns. Forty replicate tests shall comprise a...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/8-17-272.htm - 7K - Match Info - Similar pages
8-17-273
Section 8-17-273 Manufacturer to submit written certification; recertification; fee. (a) Each
manufacturer shall submit to the State Fire Marshal a written certification attesting to each
of the following: (1) Each cigarette listed in the certification has been tested in accordance
with Section 8-17-272. (2) Each cigarette listed in the certification meets the performance
standard set forth in Section 8-17-272. (b) Each cigarette listed in the certification shall
be described with the following information: (1) Brand or trade name on the package. (2) Style,
such as light or ultra light. (3) Length in millimeters. (4) Circumference in millimeters.
(5) Flavor, such as menthol or chocolate, if applicable. (6) Filter or non-filter. (7) Package
description, such as soft pack or box. (8) Marking pursuant to Section 8-17-274. (9) The name,
address, and telephone number of the laboratory, if different than the manufacturer that conducted
the test. (10) The date that the testing occurred. (c)...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/8-17-273.htm - 2K - Match Info - Similar pages
45-9-244
Section 45-9-244 Tobacco products. (a) Upon adoption of the Legislature, there is hereby imposed
on every person, firm, or corporation that sells, stores, delivers, uses, or otherwise consumes
tobacco or tobacco products in Chambers County, a county privilege, license, or excise tax
in the following amounts: (1) Twenty-five cents ($.25) for each package of cigarettes made
of tobacco or any substitute therefor. (2) Twelve cents ($.12) for each cigar of any description
made of tobacco or any substitute therefor, but not including cigarette sized and near cigarette
sized cigars which shall be taxed in the same manner as cigarettes under subdivision (1).
(3) Twenty-five cents ($.25) for each sack, can, package, or other container of smoking tobacco,
including granulated, plug cut, crimp cut, ready rubbed, and other kinds and forms of tobacco
which are prepared in such manner suitable for smoking in a pipe or cigarette. (4) Twenty-five
cents ($.25) for each sack, plug, package, or other...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/45-9-244.htm - 9K - Match Info - Similar pages
8-17-275
Section 8-17-275 Violations. (a) A manufacturer, wholesale dealer, agent, or any other person
or entity who knowingly sells or offers to sell cigarettes, other than through retail sale,
in violation of Section 8-17-272, shall be subject to a civil penalty not to exceed one hundred
dollars ($100) for each pack of the cigarettes sold or offered for sale provided that in no
case shall the penalty against a person or entity for that violation exceed one hundred thousand
dollars ($100,000) during any 30-day period. (b) A retail dealer who knowingly sells or offers
to sell cigarettes in violation of Section 8-17-272 shall be subject to a civil penalty not
to exceed one hundred dollars ($100) for each pack of the cigarettes sold or offered for sale,
provided that in no case shall the penalty against any retail dealer exceed twenty-five thousand
dollars ($25,000) for sales or offers to sell during any 30-day period. (c) In addition to
any penalty prescribed by law, any corporation,...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/8-17-275.htm - 3K - Match Info - Similar pages
25-9-134
Section 25-9-134 Blasting practices and procedures generally. (a) Only competent persons shall
be designated or permitted to handle explosives or do blasting. Only electric detonators of
proper strength may be used and the use of delay electric detonators is prohibited for blasting
coal or coal and other material. Primers shall be made up as needed for blasting and prepared
in accordance with the safety standards of the Institute of Makers of Explosives or of the
manufacturer of the explosives as approved by the chief; provided, however, that nothing provided
in this subsection shall prohibit the use of permissible millisecond blasting in conformity
with the requirements, exceptions, limitations, conditions, and restrictions on the use thereof
established or hereinafter established by the Bureau of Mines of the United States Department
of the Interior. (b) Care shall be used in placement and drilling of holes. Test roof, face,
ribs and timbers for dangerous conditions before drilling...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/25-9-134.htm - 6K - Match Info - Similar pages
32-20-2
Section 32-20-2 Definitions. For purposes of this chapter, the following terms shall have the
meanings respectively ascribed to them in this section, except where the context clearly indicates
a different meaning: (1) DEALER. A person licensed by the Alabama Manufactured Housing Commission
as a manufactured home retailer and engaged regularly in the business of buying, selling,
or exchanging manufactured homes in this state, and having an established place of business.
(2) DEPARTMENT. The Department of Revenue of this state. (3) DESIGNATED AGENT. Each judge
of probate, commissioner of licenses, director of revenue, or other county official in this
state authorized and required by law to issue motor vehicle license tags, unless otherwise
provided by law, who may perform his or her duties under this chapter personally or through
his or her deputies, or such other persons located in this state, as the department may designate.
The term shall also mean those dealers as herein defined who...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/32-20-2.htm - 5K - Match Info - Similar pages
25-12-7
Section 25-12-7 Exceptions. (a) This chapter shall not apply to the following boilers and pressure
vessels: (1) Boilers and pressure vessels under federal control or under regulations of Title
49 of the Code of Federal Regulations, Parts 192 and 193. (2) Pressure vessels used for transportation
and storage of compressed or liquefied gases when constructed in compliance with specifications
of the United States Department of Transportation and when charged with gas or liquid, marked,
maintained, and periodically requalified for use, as required by appropriate regulations of
the United States Department of Transportation. (3) Pressure vessels located on vehicles operating
under the rules of other state or federal authorities and used for carrying passengers or
freight. (4) Air tanks installed on the right of way of railroads and used directly in the
operation of trains. (5) Pressure vessels that do not exceed any of the following weights
and measures: a. Five cubic feet in volume and 250...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/25-12-7.htm - 5K - Match Info - Similar pages
8-19-5
Section 8-19-5 Unlawful trade practices. The following deceptive acts or practices in the conduct
of any trade or commerce are hereby declared to be unlawful: (1) Passing off goods or services
as those of another, provided that this section shall not prohibit the private labeling of
goods or services. (2) Causing confusion or misunderstanding as to the source, sponsorship,
approval, or certification of goods or services. (3) Causing confusion or misunderstanding
as to the affiliation, connection, or association with, or certification by another, provided
that this section shall not prohibit the private labeling of goods or services. (4) Using
deceptive representations or designations of geographic origin in connection with goods or
services. (5) Representing that goods or services have sponsorship, approval, characteristics,
ingredients, uses, benefits, or qualities that they do not have or that a person has sponsorship,
approval, status, affiliation, or connection that he or she does...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/8-19-5.htm - 12K - Match Info - Similar pages
24-4A-2
Section 24-4A-2 Definitions. As used in this chapter, the following terms shall have the meanings
ascribed to them by this section: (1) COMMISSION. The Alabama Manufactured Housing Commission.
(2) APPROVED. Conforming to the recognized codes and regulatory requirements adopted by the
commission. (3) APPROVED INSPECTION AGENCY. An organization meeting the commission's requirements
to provide inspection of manufactured buildings and to insure compliance with national recognized
codes, and rules and regulations adopted by the commission pursuant to this chapter. (4) LOCAL
GOVERNMENT. A city or county government. (5) MANUFACTURE. The process of making, fabricating,
constructing, forming or assembling a product from raw, unfinished or semifinished materials.
(6) INSTALL. The assembly of a manufactured building, components of manufactured building
on site and the process of affixing a manufactured building to land, a foundation, footings
or an existing building and service connections which...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/24-4A-2.htm - 4K - Match Info - Similar pages
|