|
23-1-94
Section 23-1-94 Construction of article not to conflict with local or special laws. Nothing
in this article shall be construed to authorize the county commissions of the several counties
to establish, promulgate, or enforce any rules, regulations, or laws which may be in conflict
with a local or special law providing for the working, maintenance, change, discontinuance,
or improvement of the public roads, bridges, or ferries of such county now in force or which
may hereafter be enacted, except in cases where the State Department of Transportation has
jurisdiction over such highways. (Code 1923, §1348; Acts 1927, No. 347, p. 348; Code 1940,
T. 23, §64.)...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/23-1-94.htm - 971 bytes - Match Info - Similar pages
6-5-710
Section 6-5-710 Definitions. For purposes of this article the following terms shall have the
following meanings: (1) AWARDING AUTHORITY. a. The Alabama Department of Transportation, if
the project is either for, or is funded in whole or in part by, the State of Alabama to construct,
repair, resurface, refurbish, replace, remove, modify, alter, or otherwise improve any public
or private infrastructure, including any public-private partnership project, for which construction
monitoring services are contracted. b. A county, city, town, or municipality that appropriates
public funds for the construction, repair, resurfacing, refurbishment, replacement, removal,
modification, alteration, or other improvement of any public or private infrastructure, including
any public-private partnership project, for which construction monitoring services are contracted.
c. All other state, county, or municipal boards, bodies, commissions, agencies, departments,
institutions, and instrumentalities, and...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/6-5-710.htm - 3K - Match Info - Similar pages
8-17-91
Section 8-17-91 Disposition of funds; overpayments. (a) The proceeds from the permit fees,
inspection fees, and penalties, if any, collected by the Commissioner of Agriculture and Industries
and the Revenue Commissioner pursuant to Section 8-17-87 together with one-third of the proceeds
of the six cent ($.06) additional motor fuel excise tax levied on gasoline under subdivision
(1) of subsection (a) of Section 40-17-325, shall be paid into the State Treasury and distributed
by the State Treasurer as follows: (1) An amount equal to five percent or no less than $175,000,
whichever is greater, of the combined proceeds received each month shall accrue to the credit
of, and be deposited in, the Agricultural Fund; and (2) The balance of the proceeds shall
be distributed as follows: a. 13.87 percent of the balance of the proceeds shall be distributed
equally among each of the 67 counties of the state monthly. The county shall deposit the proceeds
into the county's special RRR Fund as provided...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/8-17-91.htm - 9K - Match Info - Similar pages
23-1-271
Section 23-1-271 Definitions. For the purposes of this division, unless otherwise indicated,
the following terms shall have the meanings respectively ascribed to them by this section:
(1) ADJACENT AREA. An area which is adjacent to and within 660 feet of the nearest edge of
the right-of-way of any interstate or primary highway, which 660 feet distance shall be measured
horizontally along a line normal or perpendicular to the centerline of the highway. (2) BUSINESS
AREA. Any part of an adjacent area which is zoned for business, industrial, or commercial
activities under the authority of any law of this state or not zoned, but which constitutes
an unzoned commercial or industrial area as defined in this section. (3) CENTERLINE OF THE
HIGHWAY. A line equidistant from the edges of the median separating the main-traveled ways
of a divided highway or the centerline of the main-traveled way of a nondivided highway. (4)
COMMERCIAL OR INDUSTRIAL ACTIVITIES FOR PURPOSES OF UNZONED INDUSTRIAL AND...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/23-1-271.htm - 6K - Match Info - Similar pages
37-13-1
Section 37-13-1 Definitions. When used in this chapter, unless the context plainly indicates
otherwise, the present tense shall include the future tense, the singular shall include the
plural, the plural shall include the singular and the following words and phrases shall have
the meanings respectively ascribed to them by this section. (1) ADDITIONAL RAIL SERVICE AREA.
Any territory that is outside the boundaries or corporate limits, as the case may be, of any
of its authorizing subdivisions and that the governing body of the county, and of any city
or town, in which such territory is located has by resolution designated as an area in which
the authority may render rail transportation service. (2) AUTHORITY. Any public corporation
organized pursuant to this chapter or any law amendatory thereof or supplemental thereto.
(3) AUTHORIZING SUBDIVISION. Any county, city, or town in this state in which there are located
railroad properties and facilities and whose governing body receives an...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/37-13-1.htm - 3K - Match Info - Similar pages
39-2-12
Section 39-2-12 Partial and final payments of contractors by awarding authorities. (a) As used
in this section the following words shall have the meanings ascribed to them as follows: (1)
CONTRACTOR. Any natural person, partnership, company, firm, corporation, association, limited
liability company, cooperative, or other legal entity licensed by the Alabama State Licensing
Board for General Contractors. (2) NONRESIDENT CONTRACTOR. A contractor which is neither a.
organized and existing under the laws of the State of Alabama, nor b. maintains its principal
place of business in the State of Alabama. A nonresident contractor which has maintained a
permanent branch office within the State of Alabama for at least five continuous years shall
not thereafter be deemed to be a nonresident contractor so long as the contractor continues
to maintain a branch office within Alabama. (3) RETAINAGE. That money belonging to the contractor
which has been retained by the awarding authority conditioned on...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/39-2-12.htm - 18K - Match Info - Similar pages
40-12-270
Section 40-12-270 Disbursement of net proceeds from license taxes and registration fees; Secondary
Road Committee created. (a) The moneys collected each month by the judge of probate from motor
vehicle license taxes and registration fees, after deducting therefrom the amounts referred
to in subdivisions (1) and (2) of subsection (a) of Section 40-12-269, the moneys remaining
after making the said deductions being referred to in this section as "the net proceeds,"
shall be disbursed by the judge of probate as follows: (1) That portion of the net proceeds
that consists of additional amounts paid under the schedule of additional amounts set forth
in subsection (b) of Section 40-12-248 shall be remitted by the judge of probate to the State
Treasurer who shall distribute said amounts as follows: a. 64.75 percent of said amounts shall
be distributed by the State Treasurer to the State of Alabama; b. 35.25 percent of said amounts
shall be apportioned and distributed by the State Treasurer...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/40-12-270.htm - 12K - Match Info - Similar pages
45-10-260.05
Section 45-10-260.05 Certification, safety, and setback requirements. (a) The safety of the
design of all conversion system towers shall be certified by a licensed engineer with prior
experience with wind energy conversion systems. The standard for certification shall be good
engineering practices, including the requirement that the systems comply with all building
and electrical codes in this state. (b) A wind energy conversion system shall be equipped
with manual and automatic overspeed controls to limit rotation of blades to a speed below
the designed limits of the conversion system. A licensed engineer shall certify that the rotor
and overspeed control design and fabrication conforms with good engineering practices. Any
changes or alterations from the certified design shall not be permitted unless accompanied
by a licensed engineer's statement of certification. (c) All electrical compartments, storage
facilities, wire conduit and interconnections with utility companies shall...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/45-10-260.05.htm - 3K - Match Info - Similar pages
45-25-260.05
Section 45-25-260.05 Certification, safety, and setback requirements. (a) The safety of the
design of all conversion system towers shall be certified by a licensed engineer with prior
experience with wind energy conversion systems. The standard for certification shall be good
engineering practices, including the requirement that the systems comply with all building
and electrical codes in this state. (b) A wind energy conversion system shall be equipped
with manual and automatic overspeed controls to limit rotation of blades to a speed below
the designed limits of the conversion system. A licensed engineer shall certify that the rotor
and overspeed control design and fabrication conforms with good engineering practices. Any
changes or alterations from the certified design shall not be permitted unless accompanied
by a licensed engineer's statement of certification. (c) All electrical compartments, storage
facilities, wire conduit and interconnections with utility companies shall...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/45-25-260.05.htm - 3K - Match Info - Similar pages
45-28-260.05
Section 45-28-260.05 Certification, safety, and setback requirements. (a) The safety of the
design of all conversion system towers shall be certified by a licensed engineer with prior
experience with wind energy conversion systems. The standard for certification shall be good
engineering practices, including the requirement that the systems comply with all building
and electrical codes in this state. (b) A wind energy conversion system shall be equipped
with manual and automatic overspeed controls to limit rotation of blades to a speed below
the designed limits of the conversion system. A licensed engineer shall certify that the rotor
and overspeed control design and fabrication conforms with good engineering practices. Any
changes or alterations from the certified design shall not be permitted unless accompanied
by a licensed engineer's statement of certification. (c) All electrical compartments, storage
facilities, wire conduit and interconnections with utility companies shall...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/45-28-260.05.htm - 3K - Match Info - Similar pages
|