|
45-10-260.07
Section 45-10-260.07 Construction of part. This part shall not interfere with, abrogate, or
annul any covenant or other agreement between any parties. However, if this part imposes a
greater restriction upon the use of a wind energy conversion system than is imposed by another
law, rule, regulation, covenant, or agreement, the more restrictive provision shall govern
the wind energy conversion system. (Act 2014-190, p. 577, §8.)...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/45-10-260.07.htm - 743 bytes - Match Info - Similar pages
45-25-260.07
Section 45-25-260.07 Construction of part. This part shall not interfere with, abrogate, or
annul any covenant or other agreement between any parties. However, if this part imposes a
greater restriction upon the use of a wind energy conversion system than is imposed by another
law, rule, regulation, covenant, or agreement, the more restrictive provision shall govern
the wind energy conversion system. (Act 2015-348, §8; Act 2015-387, §8.)...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/45-25-260.07.htm - 758 bytes - Match Info - Similar pages
45-28-260.07
Section 45-28-260.07 Construction of part. This part shall not interfere with, abrogate, or
annul any covenant or other agreement between any parties. However, if this part imposes a
greater restriction upon the use of a wind energy conversion system than is imposed by another
law, rule, regulation, covenant, or agreement, the more restrictive provision shall govern
the wind energy conversion system. (Act 2014-191, p. 582, §8.)...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/45-28-260.07.htm - 743 bytes - Match Info - Similar pages
45-10-260.05
Section 45-10-260.05 Certification, safety, and setback requirements. (a) The safety of the
design of all conversion system towers shall be certified by a licensed engineer with prior
experience with wind energy conversion systems. The standard for certification shall be good
engineering practices, including the requirement that the systems comply with all building
and electrical codes in this state. (b) A wind energy conversion system shall be equipped
with manual and automatic overspeed controls to limit rotation of blades to a speed below
the designed limits of the conversion system. A licensed engineer shall certify that the rotor
and overspeed control design and fabrication conforms with good engineering practices. Any
changes or alterations from the certified design shall not be permitted unless accompanied
by a licensed engineer's statement of certification. (c) All electrical compartments, storage
facilities, wire conduit and interconnections with utility companies shall...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/45-10-260.05.htm - 3K - Match Info - Similar pages
45-25-260.05
Section 45-25-260.05 Certification, safety, and setback requirements. (a) The safety of the
design of all conversion system towers shall be certified by a licensed engineer with prior
experience with wind energy conversion systems. The standard for certification shall be good
engineering practices, including the requirement that the systems comply with all building
and electrical codes in this state. (b) A wind energy conversion system shall be equipped
with manual and automatic overspeed controls to limit rotation of blades to a speed below
the designed limits of the conversion system. A licensed engineer shall certify that the rotor
and overspeed control design and fabrication conforms with good engineering practices. Any
changes or alterations from the certified design shall not be permitted unless accompanied
by a licensed engineer's statement of certification. (c) All electrical compartments, storage
facilities, wire conduit and interconnections with utility companies shall...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/45-25-260.05.htm - 3K - Match Info - Similar pages
45-28-260.05
Section 45-28-260.05 Certification, safety, and setback requirements. (a) The safety of the
design of all conversion system towers shall be certified by a licensed engineer with prior
experience with wind energy conversion systems. The standard for certification shall be good
engineering practices, including the requirement that the systems comply with all building
and electrical codes in this state. (b) A wind energy conversion system shall be equipped
with manual and automatic overspeed controls to limit rotation of blades to a speed below
the designed limits of the conversion system. A licensed engineer shall certify that the rotor
and overspeed control design and fabrication conforms with good engineering practices. Any
changes or alterations from the certified design shall not be permitted unless accompanied
by a licensed engineer's statement of certification. (c) All electrical compartments, storage
facilities, wire conduit and interconnections with utility companies shall...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/45-28-260.05.htm - 3K - Match Info - Similar pages
11-81-241
Section 11-81-241 Definitions. For the purposes of this article, the following words shall
have the following meanings: (1) COSTS OF A QUALIFIED PROJECT. All costs including, but not
limited to, the following: a. All costs of acquisition, by purchase or otherwise, construction,
assembly, installation, modification, renovation, or rehabilitation incurred in connection
with any qualified project or any part of any qualified project. b. All costs of real property,
fixtures, or personal property used in or in connection with or necessary for any qualified
project or for any facilities related thereto, including, but not limited to, the following:
1. The cost of all land, estates for years, easements, rights, improvements, water rights,
connections for utility services, fees, franchises, permits, approvals, licenses, and certificates.
2. The cost of securing any franchises, permits, approvals, licenses, or certificates. 3.
The cost of preparation of any application therefor and the cost of...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/11-81-241.htm - 6K - Match Info - Similar pages
11-50A-17
Section 11-50A-17 Contracts for use of projects; purchase of electric power; payment of charges;
indemnity; enforcement of performance. (a) Any municipality, if authorized by resolution or
ordinance of its governing body, may contract with the authority for the payment of any rates,
tolls, fees, and other charges prescribed in this section and Section 11-50A-18 by the authority
for the output, capacity, use or service by the municipality of any projects or other resources
of the authority or any of its facilities or undertakings. The obligations to pay the amounts
contracted to be paid by the municipality to the authority under the contract or contracts
entered into pursuant to the provisions of this section shall be treated as expenses of operating
the electric distribution system of the municipality for the payment of which the revenues
of the municipality derived from the operation of its electric distribution system (together
with any other revenues that may be lawfully pledged...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/11-50A-17.htm - 6K - Match Info - Similar pages
11-50A-1
Section 11-50A-1 Definitions. As used in this chapter, the following words shall have the following
meanings unless the context clearly indicates otherwise: (1) AUTHORITY. Alabama Municipal
Electric Authority created pursuant to this chapter and any successor or successors thereto.
(2) BOARD. The board of directors of the authority. (3) BONDS. Any bonds issued by the authority
under the provisions of this chapter, including refunding bonds. (4) BOND ANTICIPATION NOTES.
Short term obligations issued by the authority in anticipation of the issuance of bonds. (5)
COSTS. All costs of acquisition, construction, reconstruction, improvement, equipment, alteration,
repair, or extension of any project; all costs of real and personal property required for
the purposes of any project, including any rights or undivided interest therein; all costs
of easements, franchises, water rights, fees, permits, approvals, licenses, and certificates,
and all costs of securing any permits, approvals, licenses,...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/11-50A-1.htm - 9K - Match Info - Similar pages
40-9B-3
Section 40-9B-3 Definitions. (a) For purposes of this chapter, the following words and phrases
mean: (1) ABATE, ABATEMENT. A reduction or elimination of a taxpayer's liability for tax or
payments required to be made in lieu thereof. An abatement of transaction taxes imposed under
Chapter 23 of this title, or payments required to be made in lieu thereof, shall relieve the
seller from the obligation to collect and pay over the transaction tax as if the sale were
to a person exempt, to the extent of the abatement, from the transaction tax. (2) ALTERNATIVE
ENERGY RESOURCES. The definition given in Section 40-18-1. (3) CONSTRUCTION RELATED TRANSACTION
TAXES. The transaction taxes imposed by Chapter 23 of this title, or payments required to
be made in lieu thereof, on tangible personal property and taxable services incorporated into
an industrial development property, the cost of which may be added to capital account with
respect to the property, determined without regard to any rule which...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/40-9B-3.htm - 19K - Match Info - Similar pages
|