Code of Alabama

Search for this:
 Search these answers
1 through 10 of 332 similar documents, best matches first.
  Page: 1 2 3 4 5 6 7 8 9 10   next>>

37-8-52
Section 37-8-52 Operations in proximity to high voltage overhead conductors of electricity
- Generally. (a) No person shall either personally or through an employee or agent, or as
an employee or agent of another, use, operate, place, erect, or move any tools, machinery,
equipment, apparatus, or material, or move any building or other structure or any part thereof
within 10 feet of a high voltage overhead conductor of electricity except where the person
has arranged effectively to safeguard against danger of accidental contact with the high voltage
overhead conductor of electricity by any of the following: (1) The erection of mechanical
barriers which shall prevent physical contact with the high voltage overhead conductor. (2)
Deenergizing the high voltage overhead conductor and grounding the same. (3) Temporary or
permanent relocation of the high voltage overhead conductor. (b) Only in the case of compliance
with one or more of the above safety measures, after the negotiation of...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/37-8-52.htm - 2K - Match Info - Similar pages

45-10-260.05
Section 45-10-260.05 Certification, safety, and setback requirements. (a) The safety of the
design of all conversion system towers shall be certified by a licensed engineer with prior
experience with wind energy conversion systems. The standard for certification shall be good
engineering practices, including the requirement that the systems comply with all building
and electrical codes in this state. (b) A wind energy conversion system shall be equipped
with manual and automatic overspeed controls to limit rotation of blades to a speed below
the designed limits of the conversion system. A licensed engineer shall certify that the rotor
and overspeed control design and fabrication conforms with good engineering practices. Any
changes or alterations from the certified design shall not be permitted unless accompanied
by a licensed engineer's statement of certification. (c) All electrical compartments, storage
facilities, wire conduit and interconnections with utility companies shall...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/45-10-260.05.htm - 3K - Match Info - Similar pages

45-25-260.05
Section 45-25-260.05 Certification, safety, and setback requirements. (a) The safety of the
design of all conversion system towers shall be certified by a licensed engineer with prior
experience with wind energy conversion systems. The standard for certification shall be good
engineering practices, including the requirement that the systems comply with all building
and electrical codes in this state. (b) A wind energy conversion system shall be equipped
with manual and automatic overspeed controls to limit rotation of blades to a speed below
the designed limits of the conversion system. A licensed engineer shall certify that the rotor
and overspeed control design and fabrication conforms with good engineering practices. Any
changes or alterations from the certified design shall not be permitted unless accompanied
by a licensed engineer's statement of certification. (c) All electrical compartments, storage
facilities, wire conduit and interconnections with utility companies shall...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/45-25-260.05.htm - 3K - Match Info - Similar pages

45-28-260.05
Section 45-28-260.05 Certification, safety, and setback requirements. (a) The safety of the
design of all conversion system towers shall be certified by a licensed engineer with prior
experience with wind energy conversion systems. The standard for certification shall be good
engineering practices, including the requirement that the systems comply with all building
and electrical codes in this state. (b) A wind energy conversion system shall be equipped
with manual and automatic overspeed controls to limit rotation of blades to a speed below
the designed limits of the conversion system. A licensed engineer shall certify that the rotor
and overspeed control design and fabrication conforms with good engineering practices. Any
changes or alterations from the certified design shall not be permitted unless accompanied
by a licensed engineer's statement of certification. (c) All electrical compartments, storage
facilities, wire conduit and interconnections with utility companies shall...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/45-28-260.05.htm - 3K - Match Info - Similar pages

40-23-4
sales of materials, equipment, and machinery that, at any time, enter into and become a component
part of ships, vessels, towing vessels or barges, or drilling ships, rigs or barges, or seismic
or geophysical vessels, other watercraft and commercial fishing vessels of over five tons
load displacement as registered with the U.S. Coast Guard and licensed by the State of Alabama
Department of Conservation and Natural Resources. Additionally, the gross proceeds from the
sale or sales of lifeboats, personal flotation devices, ring life buoys, survival craft
equipment, distress signals, EPIRB's, fire extinguishers, injury placards, waste management
plans and logs, marine sanitation devices, navigation rulebooks, navigation lights, sound
signals, navigation day shapes, oil placard cards, garbage placards, FCC SSL, stability instructions,
first aid equipment, compasses, anchor and radar reflectors, general alarm systems, bilge
pumps, piping, and discharge and electronic position fixing...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/40-23-4.htm - 34K - Match Info - Similar pages

37-8-54
Section 37-8-54 Operations in proximity to high voltage overhead conductors of electricity
- Exemptions. The provisions of Sections 37-8-52 through 37-8-55 shall not apply to: (1) The
construction, reconstruction, operation or maintenance of any overhead conductor or its supporting
structures, appurtenances and associated equipment by persons authorized by the owner; (2)
The operation of standard railway equipment which is normally used in the transportation of
freight or passengers, or the operation of relief trains or other emergency railroad equipment
by persons authorized by the owner; (3) Any construction, reconstruction, operation or maintenance
of any overhead structures covered by rules prescribed by the Alabama Public Service Commission;
nor (4) Any person employed or engaged in the electrical generating, transmission, distribution
or communication business, nor any agents, employees, lessees, licensees or contractors in
connection with work performed or activity conducted for...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/37-8-54.htm - 1K - Match Info - Similar pages

37-14-2
Section 37-14-2 Definitions. As used in this article, the following terms shall have the following
meanings, respectively, unless the context clearly indicates otherwise; (1) ELECTRIC SUPPLIER.
Any municipality, municipally-owned utility or other governmental entity, any cooperative,
corporation, person, firm, association or other entity engaged in the business of supplying
electric service at retail; provided, however, that a university, college or United States
military base which distributes electricity shall not be deemed an electric supplier for the
purpose of this article. (2) ELECTRIC SERVICE AT RETAIL and RETAIL ELECTRIC SERVICE. Electric
service furnished to a customer for ultimate consumption, but does not include wholesale electric
service furnished by an electric supplier to another electric supplier for resale. (3) PREMISES.
The building, structure or facility to which electricity is being metered or is to be furnished
and metered, including all meters on such building,...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/37-14-2.htm - 4K - Match Info - Similar pages

37-14-31
Section 37-14-31 Definitions. As used in this article the following terms shall have the following
meanings, respectively, unless the context clearly indicates otherwise; (1) ELECTRIC SUPPLIER.
Any municipality, municipally-owned utility or other governmental entity, any cooperative,
corporation, person, firm, association or other entity engaged in the business of supplying
electric service at retail; provided, however, that no person or entity, including the Tennessee
Valley Authority, who may not be lawfully regulated by the state by virtue of powers granted
by the laws of the United States which prevail over Alabama statutes, nor any university,
college or United States agency which distributes electricity at retail shall be deemed an
electric supplier for the purpose of this article. (2) ELECTRIC SERVICE AT RETAIL and RETAIL
ELECTRIC SERVICE. Electric service furnished to a customer for ultimate consumption, but does
not include wholesale electric service furnished by an electric...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/37-14-31.htm - 5K - Match Info - Similar pages

32-1-1.1
any motor vehicle, trailer, or semitrailer, singly or in combination, new or used, constitutes
the commodity being transported, when one set or more of wheels of any such vehicle are on
the roadway during the course of transportation, whether or not any such vehicle furnishes
the motive power. (14) DRIVER. Every person who drives or is in actual physical control of
a vehicle. (15) DRIVER'S LICENSE. Any license to operate a motor vehicle issued under the
laws of this state. (16) ELECTRIC PERSONAL ASSISTIVE MOBILITY DEVICE. A self-balancing,
two non-tandem wheeled device designed to transport only one person with an electric propulsion
system with an average power of 750 watts (1 h.p.), that has a maximum speed on a paved level
surface, when powered solely by such a propulsion system while ridden by an operator who weighs
not more than 170 pounds, of less than 20 m.p.h. The term shall not include a motorized bicycle,
motorized scooter, or motorized skateboard. (17) ESSENTIAL PARTS....
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/32-1-1.1.htm - 22K - Match Info - Similar pages

37-8-53
Section 37-8-53 Operations in proximity to high voltage overhead conductors of electricity
- Warnings signs. Whoever operates or employs any person to operate any crane, derrick, power
shovel, drilling rig, pile driver, or like apparatus, any part of which is capable of vertical,
lateral, or swinging motion, without there being posted and maintained in plain view of the
operator thereof a durable, weather-resistant warning sign legible at 12 feet, reading "WARNING,
unlawful to operate this equipment within 10 feet of overhead high voltage lines," is
guilty of a misdemeanor and, upon conviction, shall be fined not more than five hundred dollars
($500) and imprisoned for not more than 12 months, or both fined and imprisoned. Each day's
failure to post or maintain such a sign shall constitute a separate offense. (Acts 1967, No.
504, p. 1216, §2; Act 2018-402, §1.)...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/37-8-53.htm - 1K - Match Info - Similar pages

1 through 10 of 332 similar documents, best matches first.
  Page: 1 2 3 4 5 6 7 8 9 10   next>>