|
11-49B-22
Section 11-49B-22 Taxes; exemptions; reporting credit sales; lien security; state sales tax
provisions applicable; charge for collecting tax; voting. (a) The authority shall, subject
to a referendum in the counties it proposes to serve, levy, in addition to all other taxes,
including, but not limited to, municipal gross receipts license taxes, a 1/4 percent privilege
license tax against gross sales or gross receipts, provided, however, that the rate of such
tax on any person, firm, or corporation engaged in the type of business described in Section
40-23-2(4) shall be an amount equal to 1/32 percent of the gross proceeds from sales described
in such section. The gross receipts of any business and the gross proceeds of all sales which
are presently exempt under the state sales and use tax statutes are exempt from the tax authorized
by this chapter. (b) The tax levied by this chapter shall be collected by the State Department
of Revenue, the authority, the county, or by contract to a...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/11-49B-22.htm - 7K - Match Info - Similar pages
23-1-352
Section 23-1-352 Definitions. For the purpose of the laws of this state relating to aeronautics,
the following words, terms, and phrases shall have the meanings herein given, unless otherwise
specifically defined, or unless another intention clearly appears or the context requires
otherwise: (1) AERONAUTICS or AERONAUTICAL ACTIVITIES. The science and art of flight including,
but not limited to, transportation by aircraft; the operation, construction, repair, or maintenance
of aircraft, aircraft power plants and accessories, including the use, repair, packing, and
maintenance of parachutes; the design, establishment, construction, expansion, operation,
improvement, repair, or maintenance of airports, restricted landing areas, or other air navigation
facilities including the aerial and ground approaches thereto; and instruction in flying or
ground subjects pertaining thereto. (2) AERONAUTICAL INSTRUCTION. The imparting of aeronautical
knowledge or information by any aeronautics...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/23-1-352.htm - 10K - Match Info - Similar pages
45-10-260.05
Section 45-10-260.05 Certification, safety, and setback requirements. (a) The safety of the
design of all conversion system towers shall be certified by a licensed engineer with prior
experience with wind energy conversion systems. The standard for certification shall be good
engineering practices, including the requirement that the systems comply with all building
and electrical codes in this state. (b) A wind energy conversion system shall be equipped
with manual and automatic overspeed controls to limit rotation of blades to a speed below
the designed limits of the conversion system. A licensed engineer shall certify that the rotor
and overspeed control design and fabrication conforms with good engineering practices. Any
changes or alterations from the certified design shall not be permitted unless accompanied
by a licensed engineer's statement of certification. (c) All electrical compartments, storage
facilities, wire conduit and interconnections with utility companies shall...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/45-10-260.05.htm - 3K - Match Info - Similar pages
45-25-260.05
Section 45-25-260.05 Certification, safety, and setback requirements. (a) The safety of the
design of all conversion system towers shall be certified by a licensed engineer with prior
experience with wind energy conversion systems. The standard for certification shall be good
engineering practices, including the requirement that the systems comply with all building
and electrical codes in this state. (b) A wind energy conversion system shall be equipped
with manual and automatic overspeed controls to limit rotation of blades to a speed below
the designed limits of the conversion system. A licensed engineer shall certify that the rotor
and overspeed control design and fabrication conforms with good engineering practices. Any
changes or alterations from the certified design shall not be permitted unless accompanied
by a licensed engineer's statement of certification. (c) All electrical compartments, storage
facilities, wire conduit and interconnections with utility companies shall...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/45-25-260.05.htm - 3K - Match Info - Similar pages
45-28-260.05
Section 45-28-260.05 Certification, safety, and setback requirements. (a) The safety of the
design of all conversion system towers shall be certified by a licensed engineer with prior
experience with wind energy conversion systems. The standard for certification shall be good
engineering practices, including the requirement that the systems comply with all building
and electrical codes in this state. (b) A wind energy conversion system shall be equipped
with manual and automatic overspeed controls to limit rotation of blades to a speed below
the designed limits of the conversion system. A licensed engineer shall certify that the rotor
and overspeed control design and fabrication conforms with good engineering practices. Any
changes or alterations from the certified design shall not be permitted unless accompanied
by a licensed engineer's statement of certification. (c) All electrical compartments, storage
facilities, wire conduit and interconnections with utility companies shall...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/45-28-260.05.htm - 3K - Match Info - Similar pages
22-27-45
Section 22-27-45 State Solid Waste Management Plan. The Director of the Alabama Department
of Environmental Management, with the advice and consultation of the Solid Waste Management
Advisory Committee, is directed to prepare a State Solid Waste Management Plan. In developing
the state plan, the department will seek to achieve the following goals: (1) That solid waste
facilities and management systems are provided for in an orderly manner consistent with the
needs and plans of the state and its regions and local governments; (2) That alternative methods
of solid waste management are encouraged as a means of reducing the state's dependence on
landfilling; (3) That all aspects of local, regional and state planning, zoning, population
estimates, and economics are taken into consideration; and (4) That appropriate time schedules
are set for the phasing in of the required component parts of the system. Said plan shall
be developed in two phases: a. The first phase of the plan shall be...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/22-27-45.htm - 7K - Match Info - Similar pages
33-18-1
Section 33-18-1 Alabama-Coosa-Tallapoosa River Basin Compact. The State of Alabama hereby agrees
to the following interstate compact known as the Alabama-Coosa-Tallapoosa River Basin Compact:
Alabama-Coosa-Tallapoosa River Basin Compact The States of Alabama and Georgia and the United
States of America hereby agree to the following compact which shall become effective upon
enactment of concurrent legislation by each respective state legislature and the Congress
of the United States. Short Title This act shall be known and may be cited as the "Alabama-Coosa-Tallapoosa
River Basin Compact" and shall be referred to hereafter in this document as the "ACT
Compact" or "compact." Article I Compact Purposes This compact among the States
of Alabama and Georgia and the United States of America has been entered into for the purposes
of promoting interstate comity, removing causes of present and future controversies, equitably
apportioning the surface waters of the ACT, engaging in water planning,...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/33-18-1.htm - 33K - Match Info - Similar pages
33-19-1
Section 33-19-1 Apalachicola-Chattahoochee-Flint River Basin Compact. The State of Alabama
hereby agrees to the following interstate compact known as the Apalachicola-Chattahoochee-Flint
River Basin Compact: Apalachicola-Chattahoochee-Flint River Basin Compact The States of Alabama,
Florida and Georgia and the United States of America hereby agree to the following compact
which shall become effective upon enactment of concurrent legislation by each respective state
legislature and the Congress of the United States. Short Title This Act shall be known and
may be cited as the "Apalachicola-Chattahoochee-Flint River Basin Compact" and shall
be referred to hereafter in this document as the "ACF Compact" or "compact."
Article I Compact Purposes This compact among the States of Alabama, Florida and Georgia and
the United States of America has been entered into for the purposes of promoting interstate
comity, removing causes of present and future controversies, equitably apportioning the...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/33-19-1.htm - 33K - Match Info - Similar pages
11-32-7
Section 11-32-7 Powers of authority. (a) The authority shall exercise powers and duties necessary
to the discharge of its powers and duties in corporate form as follows: (1) Have succession
by its corporate name in perpetuity subject to Section 11-32-20. (2) Sue and be sued in its
own name in civil suits and actions and defend suits against it. (3) Adopt and make use of
a corporate seal and alter the same at its pleasure. (4) Adopt and alter bylaws for the regulation
and conduct of its affairs and business. (5) Acquire, receive, take, by purchase, gift, lease,
devise, or otherwise, and hold property of every description, real, personal, or mixed, whether
located in one or more counties or municipalities and whether located within or outside the
authorizing county. (6) Make, enter into, and execute contracts, agreements, leases, and other
instruments and take other actions as may be necessary or convenient to accomplish any purpose
for which the authority was organized, or exercise any...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/11-32-7.htm - 14K - Match Info - Similar pages
25-12-14
Section 25-12-14 Certificate inspection. (a) The secretary, the chief inspector, or any deputy
inspector shall have free access, during reasonable hours, to any premises in the state where
a boiler or pressure vessel is being constructed for use in, or is being installed in, this
state for the purpose of ascertaining whether the boiler or pressure vessel is being constructed
and installed in accordance with the provisions of this chapter. (b)(1) On and after January
1, 2002, each boiler and pressure vessel used or proposed to be used within this state, except
for pressure vessels covered by an owner or user inspection service as described in subsection
(d) or except for boilers or pressure vessels exempt under Section 25-12-7, owners and users
may request to waive this exemption, shall be thoroughly inspected as to their construction,
installation, and condition as follows: a. Power boilers and high pressure, high temperature
water boilers shall receive a certificate inspection...
alisondb.legislature.state.al.us/alison/CodeOfAlabama/1975/25-12-14.htm - 5K - Match Info - Similar pages
|